www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. In this addition of This Old Trailer we are going to wire up the lights on this trailer. Previously we had hooked up electric brakes and you can see, right now we have the junction box installed on there and we have wires ran for electric brakes. We have nothing for the actual tail lights themselves. That is what we are going to start on today. :30 We are going to hook up our 7-pole wiring harness with the molded connector, and we are going to hook that up to our junction box that we I installed on the frame. Inside the junction box the colors are labeled, so we will match the wires from the connector color for color with the junction box. :46 Now what we are going to do next is hook up our wires from the trailer into the junction box itself. Now there are some differences in the code, this is where you go by function not colors of the wire. Yellow is going to be the left turn on the trailer, and it is going to be red on our junction box. Right turn is going to be green on our trailer and that is going to brown on our junction box. Brown is going to be running lights on our trailer and that is going to go with green on our junction box. Now we can go ahead and secure all our connections with the hardware. All right, lets go ahead and run the wires down through the frame, back towards the tail lights. We will use the preexisting holes in …